Call Us Today:(+86) 188-1620-2828

Email:international@cleanroomhub.com

Request a Quote
No Partition HEPA Filter
No Partition HEPA Filter

Brand:E-Clean
Series:HEPA Filters
Contact Email:international@cleanroomhub.com
Contact Phone:(+86) 188-1620-2828

Product Details

E-Clean No Partition HEPA Filter

E-Clean No Partition HEPA Filter

E-Clean MPT No Partition HEPA Filters differ from Paritioned HEPA Filters in that they employ a melt adhesive instead of traditional aluminum partitions in the filter structure. Because of this, MPT No Partition HEPA Filters can both be thinner than and achieve the same results as Partitioned HEPA Filters. For example, our 50 mm MPT filter achieves the same performance as our 150 mm partitioned filter.

E-Clean HEPA Filters are manufactured on-site at our headquarters in Wuxi using advanced automated machinery. Our filters consist of a metal frame, filter paper partitions, and  partition separators all encases in a metal frame. E-Clean closely manages the production process, and we test our filters to ensure quality.

Our HEPA filters are effective at ≥99.995% for particles ≥0.3μm. Together with our high-quality initial filters, E-Clean HEPA filters do the dirty work to keep your facility executing cleanly.

E-Clean Cleanroom HEPA Filter

 E-Clean No Partition HEPA Filter 2

E-Clean HEPA Filter Knowledge Center

 

  • When installing a new filter, you should thoroughly clean your air conditioning system

  • Thoroughly clean and sanitize your cleanroom. Use a vacuum with a HEPA filter bag

  • If you are installing filters in the ceiling, also make sure to thoroughly clean the ceiling.

  • Run the air conditioning system for 12 hours after installing the filter, and then clean the cleanroom one more time before resuming normal operations.

  • Only remove the packaging from the filter immediately before installation. Perform a visual check of the filter for structural integrity. Also make sure that you are installing the proper filter by referencing the packaging/box.

  • Before and after filter installation, perform a check for leaks in the filter.

  • Never install filters with different resistance values in the same room. This is especially important in laminar flow environments, as different resistance values will upset the uniformity of air flow and air pressure in the room, thus increasing the risk of contamination.

E-Clean No Partition HEPA Filter 3

 

E-Clean HEPA Filter Spec Sheet


 

E-Clean Filter Manufacturing Facility